Safety Glasses: Frameless Frame, Clear, Scratch Resistant, White, ANSI Z87.1-2010
Milwaukee Carbide Tipped Drill Bit: 2-Cutter, 3-Flat, 7/16 in Drill Dia, 0.4375 in Decimal Equivalent, 6 in Overall Lg
Item # 902X538
$6.91 Each
Product Specs
| Flute Type: | U-Flutes |
|---|---|
| Cutting Head Type: | 2-Cutter |
| Shank Type: | 3-Flat |
| Drill Diameter: | 7/16 in |
| Decimal Equivalent: | 0.4375 in |
| Maximum Drilling Depth: | 4 in |
| Overall Length: | 6 in |
| Shank Diameter: | 3⁄8 in |
| Pack Qty: | 1 |
| Quantity: | Individual |
| Bit Material: | Carbide Tipped |
| Cutting Direction: | Right Hand |
| Display Sell UOM: | EA |
| Drill Bit Style: | Spiral |
| Drill Diameter Measurement System: | Inch |
| Drilling Application: | Conventional Drilling |
| Flute Length: | 4 in |
| For Material Thickness: | Up to 4 in |
| For Screw Anchor Tools: | Nail-in Anchors; Hollow Wall Anchors; Conical Anchors; Concrete Screws |
| For Screw Anchoring: | Yes |
| For Tool Type: | Three-Jaw Hammer Drill Chuck |
| For Use On (Best): | Masonry |
| For Use On (Good): | Concrete |
| For Use On ISO Code (Best): | Not Rated |
| For Use On ISO Code (Good): | Not Rated |
| Material Grade: | B20 |
| Number of Flutes: | 2 |
| Point Angle: | 130 ° |
| Rebar Cutter: | No |
| Removable Shank: | No |
| Series: | Not Rated |
| Shank Included: | No |
| Specifications Met: | ANSI |
| Surface Finish: | Bright (Uncoated) |
| Manufacturer Part Number: | 48-20-8825 |
Compliance and Restrictions
Country Of Origin
- Germany
About Carbide Tipped Drill Bits
Drill through tough materials such as concrete and brick with one of these carbide tipped drill bits. Carbide tipped tools offer the strength and wear resistance of carbide steel on just the cutting edge. Choose between fast spiral bits for drilling into softer or more brittle materials such as block and brick, slow spiral bits for drilling into harder surfaces such as concrete, or regular spiral bits for drilling into a wide range of materials. The bits may have 2, 3, or 4 cutting edges at the tip. Drills with more cutting edges produce less vibration than drills with fewer cutting edges and offer better drilling performance and hole quality in harder materials.
