View Similar Products

MK Morse Long-Life Multipurpose Band Saw Blade: 93 in (7 ft 9 in) Blade Lg, Gen Use, 1/2 in Blade Wd, 0.025 in Thick, 8-12 Teeth per Inch

Item # 499R339

$27.10 Each

Product Specs

Width: 1⁄2 in
Blade Thickness: 0.025 in
Performance: General Use
Blade Length: 93 in (7 ft 9 in)
Teeth per Inch: 8-12
For Use On: Wood; Composites; Plastic; Aluminum; Bronze; Brass; Stainless Steel; Steel
Tooth Type: Variable
Blade Material: Carbon Steel
Edge Material: High Speed Steel
Application: General Purpose
Duty: Medium Duty
For Curved Cuts: Yes
For Use With: Band Saw Machines
Hook Angle: 0 °
Pack Qty: 1
Pack Unit: EA
Pitch Pattern: Variable
Pkg. Qty.: 1
Primary Materials For Use On: Ferrous Metals
Product Weight: 0.3083 lb
Secondary Materials For Use On: Stainless Steel; Steel; Brass; Bronze; Aluminum; Plastic; Composite; Wood
Series: Matrix II
Set Width: 905⁄10000 in
Width of Cut: 0.044 in

Compliance and Restrictions

Country Of Origin

  • USA

About This Product

This Long-Life Multipurpose Band Saw Blade from MK Morse is 93 in (7 ft 9 in) long. Designed for general use, it is 1/2 in wide and made of a 0.025 in thick material. It has 8-12 teeth per inch. This is a variable tooth blade, which positions blade teeth at different angles and depths, providing a good general-purpose blade for performing cut-offs and cutting thin slots, and is sometimes called broach tooth. The blade is made of carbon steel. Sold individually.

About Bandsaw Blades

Select the right band saw blade to improve the performance of your tool. Blades are available in a range of lengths, widths, and teeth-per-inch (TPI) counts. The required blade length is specific to the saw. Blade width is the measurement from the front cutting edge to the back of the blade. In general, wider blades are a good choice for straight cuts, re-sawing, and cut-off sawing, and narrower blades are suitable for cutting shapes and contours. TPI is the number of teeth per inch on the cutting edge. Generally, blades with higher TPI leave a smoother finish on the workpiece but cut more slowly, and blades with fewer TPI cut more quickly but leave a rougher finish on the workpiece.

Durable and impact-resistant, these band saw blades are a good choice for making straight and curved cuts in wood, plastic, and metals such as carbon and structural steel and aluminum castings.

Associated Products (3)