View Similar Products

Multipurpose Direct Drive HVAC Motor: Single Phase, 1 Speeds, 3/4 hp Output Power, 1075 Nameplate RPM, TEAO

Item # 950U818

$99.00 Each

Product Specs

Motor Application: Condenser Fan
Output Power: 3⁄4 hp
Nameplate RPM: 1,075 RPM
NEMA Frame Size: 48YZ
NEMA Enclosure Type: TEAO
Voltage: 208 to 230V AC
Phase: Single
Shaft Rotation: CW/CCW
Thermal Protection: Automatic Reset
Dual Shaft: No
Application: HVAC Systems; Blower; Fan
Bearing Style: Ball
Body Diameter: 5.625 in
Body Length: 6.0625 in
Bolt Circle Diameter: 5.125 in
Capacitor Included: Yes
Capacitor Model: 117Z533
Capacitor Required: Yes
Compatible Key Stock Height: 1⁄16 in
Compatible Key Stock Width: 1⁄8 in
Current Type: AC
Definite Purpose Type: Condenser Fan
Display Sell UOM: EA
Features: Totally Enclosed Endshields with Removable Drain Plugs; Reversing Plug
Frequency: 60 Hz
Full-Load Current: 5.2 A; 5.9 A
Lead Length: 30 in
Maximum Ambient Temperature: 60 ° C
Minimum Speed: 1,001 RPM
Mount Type: Stud
Mounting Position: All Angle
Mounting Stud Pattern: 3-5/8" x 3-5/8"
NEMA Duty Cycle: Continuous
NEMA Insulation Class: B
Number of Speeds: 1
Overall Length: 10.8125 in
Run Type: Permanent Split Capacitor
Service Factor: 1
Shaft Diameter: 1⁄2 in
Shaft Length: 6 7⁄16 in
Shaft Style: Double Flat
Shaft to Base Distance: 7 3⁄8 in
Specifications Met: UL E37403; CSA 225293
Start Type: Permanent Split Capacitor
Stud Quantity: 4
Stud Size: 8-32
Motor Type: Permanent Split Capacitor
Frame Size: 48YZ

Compliance and Restrictions

Country Of Origin

  • China

About This Product

This Multipurpose Direct Drive HVAC Motor is single phase, which is the most common form of mechanical energy, often used in electrical outlets in homes. It has 1 speed and a 3/4 hp output power. It also has a 1075 RPM nameplate RPM rating and a 48YZ frame size. It has a 1/2 in shaft diameter and a 6 7/16 in shaft length. Sold individually.

About Direct Drive HVAC Motors

Direct-drive HVAC motors mount directly to the drive shaft of compatible HVAC equipment, which minimizes the amount of friction created during operation. As a result, direct-drive HVAC motors provide increased efficiency and produce less noise and vibration than belt-drive HVAC motors. They are commonly used to replace worn-out or damaged motors with the same specifications in HVAC equipment.

Condenser fan motors move air across a condensing unit's condenser coil to cool the refrigerant in the coil and turn it from a hot gas into a liquid.