View Similar Products

Norton Angled Flap Disc: 7 in Disc Dia, Unthreaded Center Hole, Coarse Relative Grit Grade, 7/8 in Center Hole Dia

Item # 751Z056

$17.19 Each

Product Specs

Attachment: Unthreaded Center Hole
Relative Grit Grade: Coarse
Disc Diameter: 7 in
Center Hole Diameter: 7⁄8 in
Abrasive Material: Ceramic Alumina/Zirconia Alumina
Grit: 36
Maximum RPM: 8,600 RPM
Pack Qty: 1
Disc Type Number: Type 29
Flap Density: Standard
Grit & Grade: 36 - Coarse
Abrading Application: Grinding; Stock Removal; Edge Chamfering; Weld Blending; Deburring; Rust Removal; Blending; Cleaning; Finishing
Abrasive Structure: Coated
Backing Material: Fiberglass
Backing Plate Material: Fiberglass
Backing Weight: Y
Coat: Closed
For Tool Type: Right Angle Grinders
Material Application: Mild Carbon Steel; Cast Iron
Material Category Application: Ferrous Metals
Pack Unit: EA
Resistance Properties: Vibration-Resistant
Series 2: Redheat
Series Tier: Best
Trimmable: Yes
Workpiece Shape: Flat Surfaces; Edges; Contours

Compliance and Restrictions

Country Of Origin

  • France

About Flap Discs

Used with angle grinders, flap discs are made with layered abrasive-covered flaps mounted on a rigid backing that enables grinding and finishing in one step. They provide a smoother, cooler, and more controlled grind than grinding wheels while providing longer life, a more consistent finish, and less buildup than fiber discs. Choose lower grit numbers or coarser grits for an even, smooth finish, and higher grit numbers or finer grits for a fine, polished finish.

Angled for aggressive material removal, these Type 29 discs are coated with ceramic abrasive, which is tough, stays cooler, requires less pressure, and lasts longer on hard materials than long-life zirconia alumina and is suitable for use on stainless steel and other hard metals. The angled face of a Type 29 disc makes more contact with the workpiece surface than flat (Type 27) discs for more material removal, especially on contoured surfaces.

Associated Products (2)