View Similar Products

Open Drip-Proof Direct-Drive Blower Motor: Direct Drive Fan/Blower, 1/3 hp Output Power, 1100 Nameplate RPM, ODP, 115V AC

Item # 705A679

$263.56 Each

Product Specs

Motor Application: Direct Drive Fan/Blower
Output Power: 1⁄3 hp
Nameplate RPM: 1,100 RPM
NEMA Frame Size: 56Z
NEMA Enclosure Type: ODP
Voltage: 115V AC
Phase: Single
Shaft Rotation: CW/CCW
Thermal Protection: Automatic Reset
Dual Shaft: No
Application: HVAC Systems; Fans and Air Circulators; Direct Drive Blowers
Bearing Style: Ball
Body Diameter: 5.625 in
Body Length: 8.625 in
Bolt Circle Diameter: 5.125 in
Bolt Hole Location: Shaft End
Bolt Hole Thread Size: No. 10-32
Bolt Location: Shaft End
Capacitor Included: Yes
Capacitor Required: Yes
Compatible Key Stock Height: 3⁄32 in
Compatible Key Stock Width: 3⁄16 in
Current Type: AC
Display Sell UOM: EA
Entry Location: Opposite Shaft End
Frequency: 60 Hz
Full-Load Current: 4.7 A
Maximum Ambient Temperature: 40 ° C
Minimum Speed: 1,001 RPM
Mount Type: Face
Mounting Position: All Angle
Mounting Stud Pattern: 3 5/8 in x 3 5/8 in
NEMA Duty Cycle: Continuous
NEMA Insulation Class: B
Number of Bolt Holes: 4
Number of Bolts: 4
Number of Speeds: 1
Overall Length: 12.875 in
Run Type: Permanent Split Capacitor
Service Factor: 1
Shaft Diameter: 5⁄8 in
Shaft Length: 4 1⁄4 in
Shaft Style: Flat
Shaft to Base Distance: 3 1⁄2 in
Specifications Met: CSA 225293; UL E47479
Start Type: Permanent Split Capacitor
Termination Style: Wire Lead
Motor Type: Permanent Split Capacitor
Frame Size: 56Z

Compliance and Restrictions

Country Of Origin

  • Mexico

About Direct Drive HVAC Motors

Direct-drive HVAC motors mount directly to the drive shaft of compatible HVAC equipment, which minimizes the amount of friction created during operation. As a result, direct-drive HVAC motors provide increased efficiency and produce less noise and vibration than belt-drive HVAC motors. They are commonly used to replace worn-out or damaged motors with the same specifications in HVAC equipment.