View Similar Products

Parker Hannifin Brass 45° Flare Tube Nut: Short Nut, 1/4 in Port 1 Tube Size, 7/16"-20 Thread Size, 10 PK

Item # 265K232

$10.39 Pack of 10

Product Specs

Port 1 Gender: Female
Type: Short Nut
Port 1 Tube Size: 1⁄4 in
Thread Size: 7/16"-20
Maximum Operating Pressure: 1,400 psi
Minimum Operating Temperature: -65 ° F
Maximum Operating Temperature: 250 ° F
Pack Qty: 10
Port Type: 1⁄4 in
Specifications Met: SAE J512; SAE J513; UL Listed
Application: Marine; Gas Range; Laboratories; Refrigerant Lines; Industrial; Air Conditioning; Oil Burners; Propane Lines
Features: Leak Proof Connection; Economical Fitting; Extreme Dependability and Safety; Can be Assembled and Disassembled Repeatedly
Flare Type: 45 degree
For Substance Type: Water; Air; Non-Combustible Gasses; Flammable Liquids; Freon
For Tube OD: 1⁄4 in
For Tube Wall Thickness: 0.03 in
Hex Head Width: 9⁄16 in
Material: Brass
Overall Length: 3⁄4 in
Pack Unit: PK
Port 1 Connection Type: Flared
Port 1 Thread Size: 7/16"-20
Resistance Properties: Mechanical Pullout-Resistant

Compliance and Restrictions

Country Of Origin

  • USA

About Brass 45° Flare Tube Fittings

Create a tight seal on flared metal tubing with these corrosion-resistant brass flare fittings, which are suitable for use with non-potable (not for human consumption) water. 45° flare fittings are commonly used in refrigeration systems, air compressors, and machinery and can tolerate lower pressures than 37° flare fittings.

Flare fittings have a body, nut, and sleeve (ferrule). The nut and sleeve are inserted onto the tubing, the end of the tubing is flared, and the nut is tightened onto the fitting to secure it in place. Suitable for high pressures, they resist pulling out if there is vibration in the line and can be installed and removed repeatedly.

Secure fittings to tubing with these nuts.