|Shank Diameter:||3⁄16 in|
|Shank Length:||1 in|
|Minimum Installation Depth:||1⁄2 in|
|Maximum Material Thickness:||29⁄32 in|
|For Use In:||Concrete; Metal; Mortar; Plaster; Plastic; Tile Block; Wood|
|System of Measurement:||Imperial|
|Head Diameter:||9⁄16 in|
|Head Height:||1⁄8 in|
|Removable Flat Head:||Yes|
|Thread Direction:||Right Hand|
Compliance and Restrictions
Country Of Origin
About This Product
These Pin-Drive Expansion Anchors have a 3/16 in shank diameter. They have a zinc plated finish, which provides mild corrosion resistance and a shiny finish. They are constructed of nylon, which is a lightweight, corrosion-resistant material commonly used in electronics applications because it is nonmagnetic and nonconductive. They have a 1 in shank length and are compatible with a 29/32 in maximum material thickness. They have a 9/16 in head diameter and a 1/8 in head height. Pack of 5.
About Expansion Anchors
Place these anchors into pre-drilled holes and they expand for a tight grip.
Hammer the pin to expand the shank for a tight hold. Pin drive anchors are also known as drive rivets.