View Similar Products

Precise-Control Manual Worm-Gear Winch for Pulling: Std Duty Duty Rating, Steel, 3000 lb Max Load Cap (First Layer)

Item # 958W599

$235.00 Each

Product Specs

Duty Rating: Standard Duty
Frame Material: Steel
Gear Material: Steel
Maximum Load Capacity (First Layer): 3,000 lb
Maximum Wire Rope Diameter: 9⁄32 in
Drum Capacity: 60 ft (5/16 in); 75 ft (1/4 in); 90 ft (7/32 in); 102 ft (3/16 in)
Gear Ratio: 50:1
Overall Length: 10 1⁄4 in
Overall Width: 8 1⁄4 in
Handle Length: 8 35⁄64 in
Application: Pulling
Gear Type: Worm
Brake Included: No
Features: Rubberized Handle Grip for Added Comfort; Provides Load-Holding Capability when Handle is Released
Frame Color: Red; Yellow
Frame Finish/Coating: Powder Coated
Full Drum Load Capacity: 1,486 lb
Gear Color: Yellow
Gear Finish/Coating: Galvanized
Handle Mount Location: Top
Includes: (1) Handle with Molded Hand Grip
Line Type: Wire Rope
Maximum Cable Length: 62 ft
Mount Type: Wall; Floor
Number of Gear Settings: 1
Overall Height: 9 1⁄8 in
Specifications Met: SAE J1853

Compliance and Restrictions

This product contains a chemical that is regulated under California Proposition 65.
  • Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
  • Warning: This product contains a chemical known to the State of California to cause cancer.

Country Of Origin

  • China

About Manual Winches

Pull heavy items without electricity or another power supply. Manual winches use a rotating handle and lever arm to turn the gears for lighter duty applications such as loading vehicles or items onto trailers as well as shifting loads in construction or landscaping applications. Winches are typically used for pulling applications, and should not be used for lifting unless specified.

For winch sizing, a general guideline is to choose a winch line with 1.5 times the breaking strength of the winch, and to choose a winch hook at least 1.5 times the breaking strength of the line. However, application and other variables can influence the breaking strength you need. All winches should have a minimum of 5 wraps of line around the reel during use. The capacity of the winch decreases as more layers of line are wrapped around the reel.

Driven by a screw-shaped worm and worm gear, these winches are a good choice for precision pulling applications, as well as provide added safety as the loads will not shift in the reverse direction of the pull. They typically have higher gear ratios than spur gear winches for less manual effort, and are slower moving for more control over the load.