View Similar Products

Regal Direct-Drive HVAC Motor: Room Air Conditioner, 1/4 hp Output Power, 1075 Nameplate RPM, 48Y NEMA Frame Size, OPAO, 230V AC

Item # 873R719

$133.16 Each

Product Specs

Motor Application: Room Air Conditioner
Output Power: 1⁄4 hp
Nameplate RPM: 1,075 RPM
NEMA Frame Size: 48Y
NEMA Enclosure Type: OPAO
Voltage: 230V AC
Phase: Single
Shaft Rotation: CCW
Thermal Protection: Automatic Reset
Dual Shaft: Yes
Application: Blowers; Fan Coils; Room Air Conditioners; HVAC Systems
Bearing Style: Sleeve
Body Diameter: 5.625 in
Body Length: 4.625 in
Bolt Circle Diameter: 5.142857 in
Bolt Length: 1.625 in
Bolt Thread Size: No. 8-32
Capacitor Model: 5MFD/370V
Capacitor Required: Yes
Compatible Key Stock Height: 1⁄16 in
Compatible Key Stock Width: 1⁄8 in
Current Type: AC
Display Sell UOM: EA
Features: Energy Efficient
Frequency: 60 Hz
Full-Load Current: 1.5 A
Includes: (1) Base
Lead Length: 36 in
Maximum Ambient Temperature: 60 ° C
Minimum Speed: 1,001 RPM
Mount Type: Stud
Mounting Position: Horizontal
Mounting Stud Pattern: 3 5/8 in x 3 5/8 in
NEMA Duty Cycle: Continuous
NEMA Insulation Class: B
Number of Speeds: 3
Overall Height: 5.625 in
Overall Length: 20 in
Overall Width: 5.625 in
Resilient Ring Diameter: 2.25 in
Run Type: Permanent Split Capacitor
Service Factor: 1
Shaft Diameter: 1⁄2 in
Shaft Length: 7 1⁄2 in; 7 22⁄25 in
Shaft Style: Double Flat
Shaft to Base Distance: 2 13⁄16 in
Specifications Met: CSA Certified; UL Recognized
Start Type: Permanent Split Capacitor
Termination Style: Wire Lead
Manufacturer Part Number: RA1026
Motor Type: Permanent Split Capacitor
Frame Size: 48Y

Compliance and Restrictions

Country Of Origin

  • Mexico

About Direct Drive HVAC Motors

Direct-drive HVAC motors mount directly to the drive shaft of compatible HVAC equipment, which minimizes the amount of friction created during operation. As a result, direct-drive HVAC motors provide increased efficiency and produce less noise and vibration than belt-drive HVAC motors. They are commonly used to replace worn-out or damaged motors with the same specifications in HVAC equipment.