View Similar Products

Regal Direct-Drive HVAC Motor: Room Air Conditioner, 1/10 hp_1/20 hp_1/35 hp Output Power, 1500 Nameplate RPM, OPAO

Item # 756K673

$160.36 Each

Product Specs

Motor Application: Room Air Conditioner
Output Power: 1⁄10 hp; 1⁄20 hp; 1⁄35 hp
Nameplate RPM: 1,500 RPM
NEMA Frame Size: 42Y
NEMA Enclosure Type: OPAO
Voltage: 208V AC
Phase: Single
Shaft Rotation: CCW
Thermal Protection: Automatic Reset
Dual Shaft: Yes
Application: Room Air Conditioner; HVAC
Bearing Style: Sleeve
Body Diameter: 5 in
Body Length: 4.6875 in
Capacitor Included: Yes
Capacitor Required: Yes
Compatible Key Stock Height: 1⁄16 in
Compatible Key Stock Width: 1⁄8 in
Current Type: AC
Display Sell UOM: EA
Features: Sleeve Bearing; Open Construction; Auto Protector
Frequency: 60 Hz
Full-Load Current: 0.7 A
Lead Length: 31 in
Maximum Ambient Temperature: 40 ° C
Minimum Speed: 1,401 RPM
Mount Type: Resilient Base
NEMA Duty Cycle: Continuous
NEMA Insulation Class: B
Number of Speeds: 3
Overall Length: 23.25 in
Resilient Ring Diameter: 2.5 in
Ring to Ring Distance: 4.25 in
Run Type: Permanent Split Capacitor
Service Factor: 1
Shaft Diameter: 1⁄2 in
Shaft Length: 9 1⁄4 in
Shaft Style: Flat
Shaft to Base Distance: 2 1⁄2 in
Specifications Met: CSA Certified; UL Recognized
Start Type: Permanent Split Capacitor
Termination Style: Wire Lead
Manufacturer Part Number: 9652
Motor Type: Permanent Split Capacitor
Frame Size: 42Y

Compliance and Restrictions

Country Of Origin

  • Mexico

About Direct Drive HVAC Motors

Direct-drive HVAC motors mount directly to the drive shaft of compatible HVAC equipment, which minimizes the amount of friction created during operation. As a result, direct-drive HVAC motors provide increased efficiency and produce less noise and vibration than belt-drive HVAC motors. They are commonly used to replace worn-out or damaged motors with the same specifications in HVAC equipment.