View Similar Products

Regal Open Air-Over Direct-Drive Blower Motor: Direct Drive Fan/Blower, 1/4 hp Output Power, 1075 Nameplate RPM, 48 NEMA Frame Size

Item # 287W402

$191.45 Each

Product Specs

Motor Application: Direct Drive Fan/Blower
Output Power: 1⁄4 hp
Nameplate RPM: 1,075 RPM
NEMA Frame Size: 48
NEMA Enclosure Type: OPAO
Voltage: 230V AC / 277V AC
Phase: Single
Shaft Rotation: CW/CCW
Thermal Protection: Automatic Reset
Dual Shaft: No
Application: Direct Drive Fan or Blower; Air Circulators; Fans; Blowers; HVAC System
Bearing Style: Ball
Body Diameter: 5.625 in
Body Length: 5.3125 in
Bolt Circle Diameter: 5.1875 in
Bolt Hole Location: Both Ends
Bolt Length: 0.0625 in
Bolt Location: Both Ends
Bolt Thread Pitch: 0.7938 mm
Bolt Thread Size: No. 8-32
Capacitor Included: Yes
Capacitor Required: Yes
Compatible Key Stock Height: 1⁄16 in
Compatible Key Stock Width: 1⁄8 in
Current Type: AC
Display Sell UOM: EA
Frequency: 50 Hz; 60 Hz
Full-Load Current: 1.1 A
Includes: (1) Resilient Mounting Rings
Maximum Ambient Temperature: 40 ° C
Minimum Speed: 1,001 RPM
Mount Type: Stud
Mounting Position: Horizontal
Mounting Stud Pattern: 3-5/8 in x 3-5/8 in
NEMA Duty Cycle: Continuous
NEMA Insulation Class: B
NEMA Nominal Efficiency: 66.2 %
Number of Bolt Holes: 4
Number of Bolts: 4
Number of Speeds: 4
Overall Length: 11.9375 in
Resilient Ring Diameter: 2.25 in
Ring to Ring Distance: 5.125 in
Run Type: Permanent Split Capacitor
Service Factor: 1
Shaft Diameter: 1⁄2 in
Shaft Length: 6 1⁄2 in
Shaft Style: Flat
Shaft to Base Distance: 3 in
Specifications Met: CSA Certified; UL Recognized E46035
Start Type: Permanent Split Capacitor
Manufacturer Part Number: 5KCP39JGBC28S
Motor Type: Permanent Split Capacitor
Frame Size: 48

Compliance and Restrictions

Country Of Origin

  • Mexico

About Direct Drive HVAC Motors

Direct-drive HVAC motors mount directly to the drive shaft of compatible HVAC equipment, which minimizes the amount of friction created during operation. As a result, direct-drive HVAC motors provide increased efficiency and produce less noise and vibration than belt-drive HVAC motors. They are commonly used to replace worn-out or damaged motors with the same specifications in HVAC equipment.