View Similar Products

Right-Angle C-Face Speed Reducers: 10:1 Nominal Ratio, Single, Left Hand, 175 RPM Nominal Output Speed, 56C

Item # 375A821

Sorry, this product is currently unavailable.

Product Specs

Output: Single
Shaft Orientation: Left Hand
Nominal Ratio: 10:1
Nominal Output Speed: 175 RPM
Maximum Output Torque: 972 in-lb
NEMA/IEC Frame: 56C
Worm Center Distance: 2.62 in
Maximum Input Speed: 1,750 RPM
Input Shaft Diameter: 5⁄8 in
Output Shaft Diameter: 1 1⁄4 in
Housing Material: Cast Iron
Base: Removable
Color: Gray
Features: Provide High-Ratio Speed Reduction in a Compact Space; Forward and Reversible Rotation; Resistance to Back Driving; Provide Smooth Form of Gearing
Finish/Coating: Powdered Epoxy Paint
Gear: Worm Gear
Gear Material: Steel
Includes: Motor Bolts; (1) Output Key
Input: C-Face
Input Keyway Size: 0.188 in x 1.38 in
Lubrication: Klubersynth UH1 6-460
Maximum Input Horsepower: 3 hp @ 1750 RPM
Mount: Drilled-Tapped Hole Pattern
Mount Orientation: All Position
Number of Stages: 1
Output Keyway Size: 1/4 in X 1/4 in
Output Shaft: Solid Shaft
Output Shaft Length: 2.63 in
Overall Height: 8.88 in
Overall Length: 9.44 in
Overall Width: 8.94 in
Overhung Load Capacity: 1,300 lb
Pack Qty: 1
Pack Unit: EA
Seal: Double Lip
Specifications Met: AGMA

Compliance and Restrictions

WARNING Cancer and Reproductive Harm - www.p65warnings.ca.gov

Country Of Origin

  • USA

About Right-Angle C-Face Speed Reducers

Make sure your drive system is operating at the proper speeds and torque for your application with these right-angle speed reducers. They mount to NEMA C-face motors and are suitable for setups where the input and output shafts are perpendicular.

Speed reducers lower the speed of rotation of the input shaft by a certain ratio and increase the power transmitted to the output shaft by the same ratio.

Durable cast iron speed reducers are suitable for a wide range of applications.