View Similar Products

Sandvik Coromant Boring Bar: Multilayer TiAlN/TiN, Carbide-Tipped, Inch, 11811/50000 in Shank Dia, 0.2 Radius, Turning

Item # 736W837

$46.35 Each

Product Specs

Finish/Coating: Multilayer TiAlN/TiN
Cutter Material: Carbide-Tipped
Measurement System: Inch
Shank Diameter: 11811⁄50000 in
Radius: 0.2
Minimum Bore Diameter: 0.244094 in
Maximum Bore Depth: 0.029528 in
Overall Length: 2 203⁄3125 in
Cutting Direction: Right Hand
Center to Cutting Tip: 0.116142 in
Cutting Application: Turning
Depth of Cut: 0.029528 in
For Use With: CXS-06 CoroTurn Boring Bars
Material Application (First Choice): Stainless Steel; Non Ferrous Metals; Steel; Heat Resistant Alloys
Material Application ISO Number (First Choice): M; N; P; S
Material Grade: 1025
Overhang: 1.10236 in
Pack Qty: 1
Pack Unit: EA
Rake: Neutral
Series: CoroTurn
Side Cutting Edge Angle: 98 °
Through Coolant: No

Compliance and Restrictions

WARNING Cancer - www.p65warnings.ca.gov

Country Of Origin

  • United Kingdom

About Small Solid Carbide Turning Bars

Produce bores, grooves, and threads on the inside of a workpiece with these turning bars. Also known as boring bars, they have a single cutting tip at the end of a shank, which attaches to a lathe. Made from solid carbide, they provide good wear resistance at high speeds but require rigid toolholding because they may be brittle.