View Similar Products

Sandvik Coromant Carbide Threading Insert: MATL Insert, External, Left Hand, VP60, 3 Seat Size, 12 Min Thread per Inch, CoroCut XS, 5 PK

Item # 277Z168

$261.15 Pack of 5

Product Specs

Insert Style: MATL
Threading Location: External
Thread Direction: Left Hand
Thread Standard: VP60
Seat Size: 3
Minimum Thread per Inch: 12
Maximum Thread per Inch: 72
Minimum Thread Pitch: 0.014 in
Maximum Thread Pitch: 0.079 in
Thread Height Difference: 1.5 mm
Material Grade: 1025
For Use On: Stainless Steel; Nonferrous Metals; Steel; Heat-Resistant Alloys
Product Family: CoroCut XS
Cutting Direction: Left Hand
ANSI Code: MATL 3 60-N 1025
Application: Sharp Edge Geometry
Clearance Angle: 6 °
Coating Process: PVD
Corner Radius: 0.002 in
Cutting Application: Threading Turning
Display Sell UOM: PK
Finish/Coating: TiAlN/ TiN
ISO Code: MATL 3 60-N 1025
Insert Size: 3
Material: Carbide
Material Application ISO Number (First Choice): M; N; P; S
Number of Cutting Edges: 2
Rake: Positive
Series: CoroCut XS
Thickness: 0.125 in
Thread Profile Type: Full Profile; Partial Profile
Through-Hole ID: 0.188976 in

Compliance and Restrictions

Country Of Origin

  • Japan

About Carbide Threading Inserts

Install these inserts onto a compatible threading tool holder to form a cutting edge. Depending on the insert, you can either replace the insert when the cutting edge is worn or rotate the insert to reveal a new edge. The inserts can be rotated or changed without disassembling the tool holder, reducing downtime. Made from solid carbide, they provide good wear resistance when machining tough materials.

Associated Products (4)