View Similar Products

Sandvik Coromant Rhombic (C) 80° Turning Inserts: For Heat Resistant Alloys, CNMG Insert, 19 Seat Size, 0° Clearance Angle, 3/4 in Insert Size, 10 PK

Item # 209W601

$359.60 Pack of 10

Product Specs

Insert Style: CNMG
Seat Size: 19
Rake: Negative (Extended-Life)
Clearance Angle: 0 °
Insert Size: 3⁄4 in
Thickness: 1⁄4 in
Corner Radius: 1⁄16 in
Application: Medium
Chipbreaker Code: SM
Wiper Insert: No
Material Grade: 1105
For Use On: Heat Resistant Alloys
ANSI Code: CNMG 644-SM 1105
Coating Process: PVD
Cutting Application: Turning
Cutting Direction: Neutral
Cutting Edge Length: 0.762 in
Feed Type: Medium Feed
General Shape: Rhombic
Hole Type: Straight Hole
ISO Code: CNMG 644-SM 1105
Included Angle: 80 °
Material: Carbide
Material Application ISO Number (First Choice): S
Number of Cutting Edges: 4
Shape: 80° Rhombus
Through-Hole ID: 0.312 in

Compliance and Restrictions

This product contains a chemical that is regulated under California Proposition 65.
  • Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
  • Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.

Country Of Origin

  • Varies

About Rhombic (C) 80° Turning Inserts

Providing the best balance of cutting-edge strength and operational versatility of all the insert shapes, these rhombic inserts have an 80° point angle and are a good choice for a wide range of longitudinal turning applications. With a cutting edge that is stronger than a trigon insert but less strong than a square insert, they are recommended for facing, roughing, light roughing, and semi-finishing applications.

Insert shapes are available with a range of point angles. In general, inserts with a large point angle have a stronger cutting edge but produce more vibration and require more machine power than inserts with a small point angle. Inserts with a small point angle are more versatile, provide better accessibility for detailed cutting, produce less vibration, and require less machine power than inserts with a large point angle, but they have a weaker cutting edge and may be more prone to heat damage.

Inserts are available with a negative or positive basic shape. Negative inserts have a 0° clearance angle. They provide good edge strength and are recommended for external turning and heavy cutting applications. Double-sided negative inserts offer twice as many cutting edges as positive inserts, but single-sided negative inserts provide the best stability in heavy roughing applications. Positive inserts have a clearance angle that is greater than 0° and are a good choice for internal turning applications and external turning applications on slender workpieces. Positive inserts are single sided and produce lower cutting forces than negative inserts.

Choose from a range of turning inserts that perform well when machining on heat-resistant materials.

Associated Products (5)