View Similar Products

Schneider Electric Push Button Contact Block: 1NC Pole-Throw Configuration, Momentary, Operator, Screw/Clamp, JIS C 852

Item # 814A585

$28.81 Each

Product Specs

Pole-Throw Configuration: 1NC
Switch Action: Momentary
Accessory Type: Contact Block
Application: Operator
Compatible Panel Cutout Diameter: 30 mm
Connection Type: Screw/Clamp
Contact Material: Silver Alloy
Current Type: AC
Environmental Conditions: Rain Tight; Dust Tight; Oil Tight; Corrosion Resistant
Features: Feature Double-Break Fine Silver Contacts with Wiping Action; Terminals are at 20 ° Angle to Eliminate Interference with Other Contact Blocks Mounted in Tandem; No. 12 to 24 AWG Wire Range Allow Use of More Common Small Wire Sizes
For Use With: Schneider 9001K Series 30 mm Operators
IP Rating: Not Rated
Maximum Operating Temperature: 158 ° F
Minimum Operating Temperature: -40 ° F
NEMA Contact Rating Designation: A600/Q600
RoHS Compliant: Yes
Specifications Met: EN/IEC 60947-1; CSA C22-2 No. 14; UL 508; JIS C 852; JIS C 4520; EN/IEC 60947-5-4; EN/IEC 60947-5-1
Thermal Continuous Test Current: 10 A
Voltage: 250V AC
Manufacturer Part Number: 9001KA42

Compliance and Restrictions

Country Of Origin

  • Japan

About 30mm Push Buttons

Also known as heavy-duty push buttons due to their large size, these push buttons install into a 30mm diameter opening in a control panel or enclosure.

Choose from a variety of operators, which are just the button head, or switches, which are ready-to-install complete units.