|Chain Construction:||Hollow Pin|
|ANSI Chain Size:||C2042HP|
|Roller Diameter:||0.625 in|
|Overall Width:||0.689 in|
|Overall Length:||10 ft|
|Tensile Strength:||2,430 lb|
|Includes:||(1) Connecting Link|
|Number of Strands:||Single|
|Features:||Minimize Wear Elongation; Resist Wear and Distortion; Hardened Carbon Steel Construction|
|Link Plate Height:||0.472 in|
|Link Plate Thickness:||0.060 in|
|Maximum Allowable Load:||397 lb|
|Maximum Operating Temperature:||300 ° F|
|Minimum Operating Temperature:||15 ° F|
|Pin ID:||0.157 in|
|Pin OD:||0.224 in|
|Resistance Properties:||Wear Resistant|
|Width Between Roller Link Plates:||0.312 in|
Compliance and Restrictions
- Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
Country Of Origin
About Single-Strand Roller Chains
These chains have a single row of links that mesh with teeth on a compatible sprocket to transmit power between drive shafts in a chain drive system. Unlike belts, chains will not slip or creep, and they can operate in wet, dirty, or corrosive environments. Use chains with sprockets that have the same ANSI number.
Featuring extra-long plates, these double-pitch roller chains have half as many pins and rollers as comparable standard roller chains and are an economical solution for applications with light loads, low to moderate speeds, and long drives.