View Similar Products

Slotted Spring Pin: 18-8 Stainless Steel, Passivated, 1/2 in OD, Fits 0.5 Min Hole Dia, Fits 0.51 Max Hole Dia, 3 in Overall Lg, 5 PK

Item # 944Z870

$25.96 Pack of 5

Product Specs

Finish: Passivated
Material: 18-8 Stainless Steel
Outside Diameter: 1⁄2 in
Fits Minimum Hole Diameter: 0.5 in
Fits Maximum Hole Diameter: 0.51 in
Overall Length: 3 in
Wall Thickness: 0.094 in
Chamfer Diameter: 0.4849 in
Chamfer Length: 0.11 in
Double Shear Strength: 15,800 lb
Pack Qty: 5
System of Measurement: Imperial
Specifications Met: ANSI/ASME B18.8.2
Display Sell UOM: PK
Magnetism: May Be Magnetic
Outside Diameter Tolerance: +/-0.0055 in
Overall Length Tolerance: +/-0.025 in
REACH Compliant: No
RoHS Compliant: Yes
Rockwell Hardness: Work Hardened
Type: Slotted

Compliance and Restrictions

Country Of Origin

  • USA

About This Product

These Slotted Spring Pins are constructed of 18-8 stainless steel, which provides corrosion resistance, includes grades 302 and 304 stainless steel, is the most common choice for stainless steel, and may be mildly magnetic. They have a passivated finish, which describes stainless steel that has had surface contaminants removed to increase the natural corrosion resistance of the material. They also have a 1/2 in outside diameter and fit a minimum hole diameter of 0.5 in. They fit a maximum hole diameter of 0.51 in and have a 3 in overall length. They also have a 0.094 in wall thickness. Pack of 5.

About Spring Pins

Also known as tension pins or roll pins, spring pins are hollow, cylindrical pins coiled or slit along their length so that they compress during insertion and hold in place via tension. They install in holes smaller than the pin diameter and distribute stress along the length of the pin.

The slot in these springs compresses during installation to conform to the hole for a tight fit.