View Similar Products

Slotted Spring Pin: 18-8 Stainless Steel, Passivated, 3/32 in OD, Fits 0.094 Min Hole Dia, 5/16 in Overall Lg, 100 PK

Item # 564R173

Sorry, this product is currently unavailable.

Product Specs

Finish: Passivated
Material: 18-8 Stainless Steel
Outside Diameter: 3⁄32 in
Fits Minimum Hole Diameter: 0.094 in
Fits Maximum Hole Diameter: 0.097 in
Overall Length: 5⁄16 in
Wall Thickness: 0.022 in
Chamfer Diameter: 0.091 in
Chamfer Length: 0.038 in
Double Shear Strength: 670 lb
System of Measurement: Imperial
Specifications Met: ANSI/ASME B18.8.2
Chamfer Diameter Tolerance: Not Rated
Chamfer Length Tolerance: Not Rated
Magnetism: May Be Magnetic
Outside Diameter Tolerance: +/-0.002 in
Overall Length Tolerance: +/-0.015 in
REACH Compliant: No
Rockwell Hardness: Work Hardened
RoHS Compliant: Yes
Salt Spray Results/ASTM B117: Not Rated
Type: Slotted

Compliance and Restrictions

Country Of Origin

  • USA

About This Product

These Slotted Spring Pins are made of 18-8 stainless steel, which provides corrosion resistance, includes grades 302 and 304 stainless steel, is the most common choice for stainless steel, and may be mildly magnetic. They have a finish that is passivated, which describes stainless steel that has had surface contaminants removed to increase the natural corrosion resistance of the material. They have a 3/32 in outside diameter, compatible with a minimum hole diameter of 0.094 in. They are compatible with a maximum hole diameter of 0.097 in and have an overall length of 5/16 in. They also have a wall thickness of 0.022 in. Pack of 100.

About Spring Pins

Also known as tension pins or roll pins, spring pins are hollow, cylindrical pins coiled or slit along their length so that they compress during insertion and hold in place via tension. They install in holes smaller than the pin diameter and distribute stress along the length of the pin.

The slot in these springs compresses during installation to conform to the hole for a tight fit.

Associated Products (1)