Slotted Spring Pin: 18-8 Stainless Steel, Passivated, 5 mm OD, Fits 5 Min Hole Dia, Fits 5.2 Max Hole Dia, 16 mm Overall Lg, 10 PK

Item # 851W783

$3.54 Pack of 10

Product Specs

Finish: Passivated
Material: 18-8 Stainless Steel
Outside Diameter: 5 mm
Fits Minimum Hole Diameter: 5 mm
Fits Maximum Hole Diameter: 5.2 mm
Overall Length: 16 mm
Wall Thickness: 1 mm
Chamfer Diameter: 3.4 mm
Chamfer Length: 0.9 mm
Double Shear Strength: 3,943 lb
System of Measurement: Metric
Specifications Met: ISO 8752
Chamfer Diameter Tolerance: Not Rated
Chamfer Length Tolerance: Not Rated
Magnetism: May Be Magnetic
Outside Diameter Tolerance: Not Rated
Overall Length Tolerance: +/-0.50 mm
REACH Compliant: No
Rockwell Hardness: Work Hardened
RoHS Compliant: Yes
Salt Spray Results/ASTM B117: Not Rated
Type: Slotted

Compliance and Restrictions

Country Of Origin

  • USA

About this product

These Slotted Spring Pins are made of 18-8 stainless steel, which provides corrosion resistance, includes grades 302 and 304 stainless steel, is the most common choice for stainless steel, and may be mildly magnetic. They have a finish that is passivated, which describes stainless steel that has had surface contaminants removed to increase the natural corrosion resistance of the material. They have an outside diameter of 5 mm, compatible with a minimum hole diameter of 5 mm. They are compatible with a maximum hole diameter of 5.2 mm and have an overall length of 16 mm. They also have a wall thickness of 1 mm. Pack of 10.

About

Also known as tension pins or roll pins, spring pins are hollow, cylindrical pins coiled or slit along their length so that they compress during insertion and hold in place via tension. They install in holes smaller than the pin diameter and distribute stress along the length of the pin.

The slot in these springs compresses during installation to conform to the hole for a tight fit.