View Similar Products

Submersible Sewage Pump: 1/2 hp Input Horsepower, Manual, Continuous Motor Duty Class, Cast Iron, 3 Phase, 460V AC

Item # 275U253

$1,158.69 Each

Product Specs

Operation: Manual
Motor Duty Class: Continuous
Housing Material: Cast Iron
Base Material: Cast Iron
Phase: 3
Voltage: 460V AC
Input Horsepower: 1⁄2 hp
Max Flow Rate: 122 gpm
Max Head: 19 ft
Max Motor Speed: 1,750 RPM
Max Solid Dia: 2 in
Cord Length: 20 ft
Impeller Design: Semi-Open; Non-Clog
Outlet Pipe Size: 2 in
Application: Homes; Sewage Systems; Dewatering Effluent; Water Transfer; Light Industrial; Commercial Applications
Bearing: Anti-Friction Lubricated Ball
Body OD: 12.5 in
Cord & Plug Features: Oil Resistant; Chemical Resistant and Water Resistant; SJTOW; STOW
Current: 1.7 A
Discharge Orientation: Vertical
Display Sell UOM: EA
Fasteners Required: Yes
Features: Designed for Continuous Operation When Fully Submerged; Cast Iron Flanged Volute Type for Maximum Efficiency
For Fluid Type: Water
Hertz: 60 Hz
Impeller Material: Cast Iron
Impeller OD: 5 in
Inlet Pipe Size: 2 in
Inlet Type: NPT
Max Flow Rate @ Various Head: 122 gpm at 10 ft of Head; 90 gpm at 15 ft of Head; 50 gpm at 20 ft of Head
Max Fluid Temperature: 140 ° F
Motor Electrical Connection: Power Cord with Plug
Motor Insulation Class: B
Motor Type: Capacitor Start
Mounting Hardware Required: Yes
Outlet Type: NPT
Overall Height: 19 in
Overall Width: 8 1⁄4 in
Power Source: Electric
Protection Features: Motors Shall Have An on Winding Sensor with Automatic Reset
Resistance Properties: Corrosion-Resistant
Seal Material: Silicon Carbide
Seal Type: Mechanical
Shaft Material: 300 Stainless Steel
Specifications Met: CSA Certified; UL Listed
Submersible: Yes
Switch Type: No Switch
Wetted Material: Cast Iron; 400 Stainless Steel

Compliance and Restrictions

Country Of Origin

  • USA

About Sewage Pumps

Move sewage water and waste with solids up to 2" in diameter between locations using these pumps. They pump waste from the lowest area of a sewage basin, typically installed below the basement level of a facility, to a disposal line such as a septic tank or sewer line.

Choose these sewage pumps for light industrial applications requiring continuous operation, applications that don't require moving a large volume of water, or in areas where the pump must continue to run when dry. They are often used in hospitals, farms, and manufacturing facilities.