View Similar Products

Totally Enclosed Non-Ventilated Washdown Motor: TENV, Three Phase, Base/Face Mounting, 3/4 hp Output Power, 5/8 in Shaft Dia

Item # 377U496

$628.75 Each

Product Specs

Phase: Three
Output Power: 3/4 hp
Nameplate RPM: 3,500 RPM
NEMA Frame Size: 56C
Voltage: 230V AC; 460V AC
NEMA Enclosure Type: TENV
Thermal Protection: None
Accelerating Torque: 380 oz-in
Application: Food Process; Medicine Industry; Harsh Environment
Bearings: Ball
Body Diameter: 6.45 in
Body Length: 6.5 in
Compatible Key Stock Height: 3⁄32 in
Compatible Key Stock Width: 3⁄16 in
Conduit Box: Split
Cord Length: 8.6 in
Current: 2.3 A
Drain Plugs: Yes
Electrical Connection: Wire Leads
Endshields: 300 Series Stainless Steel
Features: Corrosion Resistant; Protect Internal Components; Exterior is Completely Paint and Coating Free
Frame Material: Stainless Steel
Frequency: 60 Hz
Full-Load Torque: 213.6 oz-in
IP Rating: 66
Includes: Protective Shaft Sleeve; Shaft Key; (2) Stainless Steel T-Drain Plugs
Inverter Rated: Yes
Maximum Ambient Temperature: 40 ° C
Maximum Speed: 3,600 RPM
Minimum Speed: 3,001 RPM
Motor Mounting Position: Horizontal or Vertical Shaft Down
Motor Type: 3-Phase
Mounting Bracket Material: Stainless Steel
Mounting Hole Diameter: 0.375 in
Mounting Style: Face; Base
NEMA Duty Cycle: Continuous
NEMA Insulation Class: F
NEMA Nominal Efficiency: 78.5 %
NEMA Torque Designation: Design B
Number of Mounting Holes: 4
Overall Height: 6.75 in
Overall Length: 9 3⁄8 in
Overall Width: 8.95 in
Peak Torque: 1,260 oz-in
Power Type: AC
RoHS Compliant: Yes
Service Factor: 1.15
Shaft Design: Keyed
Shaft Diameter: 5⁄8 in
Shaft Length: 1 7⁄8 in
Shaft Material: Stainless Steel
Shaft Rotation: CW/CCW
Shaft to Base Distance: 3 1⁄2 in
Specifications Met: CE Compliant; CSA Certified; UL Component Recognized
Starting Torque: 933.33 oz-in
Wattage: 740 W

Compliance and Restrictions

Country Of Origin

  • China

About This Product

This Totally Enclosed Non-Ventilated Washdown Motor has a TENV NEMA enclosure type, which is a motor housing that completely encases the motor to help prevent the entry of outside air or dust and relies on natural convection to cool the motor by transferring heat to surrounding air. It's three phase, which describes mechanical energy generated in three overlapping phases for high efficiency. It has the following mounting styles: base and face. It has a 3/4 hp output power and a 3500 RPM nameplate RPM rating. It has a 56C NEMA frame size and a 5/8 in shaft diameter. Sold individually.

About Washdown Motors

Designed to withstand water or other liquids, these washdown motors are a good choice for powering machinery that will be regularly hosed down and cleaned. They have a totally enclosed housing that helps keep dirt and moisture from getting inside the motor in damp, dirty, and dusty environments. They also have drain holes that allow any condensation inside the housing to drain out. Commonly used to replace existing motors with the same specifications on equipment in food processing, chemical processing, and pharmaceutical plants.

Typically more compact than fan-cooled motors, TENV motors don't rely on an external fan or open vents for cooling and are instead cooled by air circulated by the motor.