View Similar Products

V-Belt Pulley: A/AX/B/BX Belt Section Size, 3 Grooves, For A-Section (4L, A & AX) & B-Section (5L, B & BX), Solid, 7.375 in OD

Item # 588A581

$97.63 Each

Product Specs

Belt Section Group: For A-Section (4L, A and AX) and B-Section (5L, B and BX)
Pulley Construction: Solid
Number of Grooves: 3
OD: 7.375 in
Belt Section Size: A; AX; B; BX
Bore: Bushed Bore
For Bushing Type: SK
Application: General Drive Systems
Color: Gray
Face Width: 2.5 in
Features: Maximum Performance Over a Long Life Span; Easy to Install and Remove; Constructed of Fine Grain
Finish/Coating: Painted/Powder-Coated
For Use With: A(X) or B(X) Single or B(X) Banded Belts
Groove Depth: 0.61 in
Industry Number: 703B
Length Through Bore: 1.25 in
Material: Cast Iron
Maximum Shaft Diameter: 2.5 in
Minimum Shaft Diameter: 0.5 in
Overall Width: 2.5 in
Pitch Diameter: 7.413 in (B); 6.85 in (A)
Setscrew: No
Specifications Met: ARPM IP-20

Compliance and Restrictions

This product contains a chemical that is regulated under California Proposition 65.
  • Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
  • Warning: This product contains a chemical known to the State of California to cause cancer.

Country Of Origin

  • Varies

About Multigroove V-Belt Pulleys

Multiple V-shaped grooves on these pulleys accommodate one banded V-belt or multiple single V-belts to provide maximum friction and torque in compatible V-belt drive systems. When matching a belt to a pulley, make sure the style (or series) and width of the belt are compatible with the pulley.

Lightweight but sturdy, these cast iron V-belt pulleys are suitable for general-purpose applications. They have a bushed bore and must be connected to a drive shaft with a compatible bushing.

Associated Products (3)