View Similar Products

Winsmith Right-Angle C-Face Speed Reducers: Double, Left & Right, 60:1 Nominal Ratio, 29 RPM Nominal Output Speed, 56C

Item # 121K563

$1,424.49 Each

Product Specs

Output: Double
Shaft Orientation: Left and Right
Nominal Ratio: 60:1
Nominal Output Speed: 29 RPM
Maximum Output Torque: 1268 in-lb
NEMA/IEC Frame: 56C
Worm Center Distance: 2.63 in
Maximum Input Speed: 1,725 RPM
Input Shaft Diameter: 5⁄8 in
Output Shaft Diameter: 1 11⁄16 in
Housing Material: Cast Iron
Base: Removable
Color: White
Features: Reversible Rotation; Interchangeable; Flexibility in Mounting; Suitable for High Pressure Washdown
Finish/Coating: Epoxy Painted
Gear: Worm Gear
Gear Material: Bronze
Includes: (1) Plastic Vent; (1) Synthetic Food Grade Lubricant; (1) Motor Hardware Mounting Kit
Input: C-Face Quilled
Input Keyway Size: 3/16 in x 3/32 in
Input Shaft Length: 1.63 in
Lubrication: Mobil Glygoyle 460
Maximum Input Horsepower: 0.75 hp
Mount: Housing Mount
Mount Orientation: Horizontal
Number of Stages: 1
Output Keyway Size: 3/8 in x 3/16 in
Output Shaft: Hollow Shaft
Output Shaft Length: 3.13 in
Overall Height: 7.88 in
Overall Length: 9.88 in
Overall Width: 7.0 in
Overhung Load Capacity: 1,823 lb
Pack Qty: 1
Pack Unit: EA
Resistance Properties: Scratch-Resistant
Seal: Spring Loaded Lip
Specifications Met: AGMA; ASTM B-117
Manufacturer Part Number: E26MWSS, 60:1, 56C

Compliance and Restrictions

Country Of Origin

  • USA

About Right-Angle C-Face Speed Reducers

Make sure your drive system is operating at the proper speeds and torque for your application with these right-angle speed reducers. They mount to NEMA C-face motors and are suitable for setups where the input and output shafts are perpendicular.

Speed reducers lower the speed of rotation of the input shaft by a certain ratio and increase the power transmitted to the output shaft by the same ratio.