View Similar Products

Winsmith Right-Angle C-Face Speed Reducers: Double, Left & Right, 40:1 Nominal Ratio, 43 RPM Nominal Output Speed, 56C, White

Item # 656K740

$889.92 Each

Product Specs

Output: Double
Shaft Orientation: Left and Right
Nominal Ratio: 40:1
Nominal Output Speed: 43 RPM
Maximum Output Torque: 585 in-lb
NEMA/IEC Frame: 56C
Worm Center Distance: 2 in
Maximum Input Speed: 1,725 RPM
Input Shaft Diameter: 5⁄8 in
Output Shaft Diameter: 1 7⁄16 in
Housing Material: Cast Iron
Base: Removable
Color: White
Features: Reversible Rotation; Interchangeable; Flexibility in Mounting; Suitable for High Pressure Washdown
Finish/Coating: Epoxy Painted
Gear: Worm Gear
Gear Material: Bronze
Includes: (1) Plastic Vent; (1) Synthetic Food Grade Lubricant; (1) Motor Hardware Mounting Kit
Input: C-Face Quilled
Input Keyway Size: 3/16 in x 3/32 in
Input Shaft Length: 1.63 in
Lubrication: Mobil Glygoyle 460
Maximum Input Horsepower: 0.5 hp
Mount: Housing Mount
Mount Orientation: Horizontal
Number of Stages: 1
Output Keyway Size: 3/8 in x 1/8 in
Output Shaft: Hollow Shaft
Output Shaft Length: 2.13 in
Overall Height: 5.63 in
Overall Length: 7.5 in
Overall Width: 6.63 in
Overhung Load Capacity: 1,345 lb
Pack Qty: 1
Pack Unit: EA
Resistance Properties: Scratch-Resistant
Seal: Spring Loaded Lip
Specifications Met: ASTM B-117; AGMA
Manufacturer Part Number: E20MWSS, 40:1, 56C

Compliance and Restrictions

Country Of Origin

  • USA

About Right-Angle C-Face Speed Reducers

Make sure your drive system is operating at the proper speeds and torque for your application with these right-angle speed reducers. They mount to NEMA C-face motors and are suitable for setups where the input and output shafts are perpendicular.

Speed reducers lower the speed of rotation of the input shaft by a certain ratio and increase the power transmitted to the output shaft by the same ratio.